Air Factory Hub Wattage Range: Coil Guide
Updated September 16, 2026 · 10 min read · VapeWholesaleHub
This page looks at Air Factory vape range through one specific lens: wattage range. There are 1800 pages in this library, each covering a different angle, so if you need the wider picture start with the buyer guide and come back here for the detail on wattage range.
Wattage range is the specification that ties device and coil together, and Air Factory vape range publishes a window rather than a single number.
Choosing a resistance
Returns data is the most under-used dataset in this trade, and reading it properly tells you more about Air Factory vape range than any review roundup.
On Air Factory vape range specifically, running at the bottom of the range preserves coils; running at the top maximises vapour, and Air Factory vape range handles both ends cleanly.
Priming properly
Availability beats optimisation. A slightly less profitable line of Air Factory vape range that is always in stock out-earns the perfect one that is not.
On Air Factory vape range specifically, running at the bottom of the range preserves coils; running at the top maximises vapour, and Air Factory vape range handles both ends cleanly.
Knowing when it is done
Testing Air Factory vape range across at least two devices before committing to a case quantity prevents the most expensive kind of assumption.
On Air Factory vape range specifically, most disappointment comes from a mismatch here, so matching power to Air Factory vape range is worth doing deliberately.
| Specification | Typical value | Why it matters |
|---|---|---|
| Capacity | 10 ml / 600 puffs | Sets how often a customer rebuys |
| Battery | 650 mAh | Decides the daily-use experience |
| Output | 18 W @ 1.6 ohm | Must match the coil fitted |
| Strength | 12 mg | Drives who the product suits |
| Coil life | 15 days average | Feeds the accessory sale |
Questions we are asked about wattage range
What is the minimum order for Air Factory vape range?
Mixed cases start at 100 units, which is deliberately low enough for a single shop to test demand. The discount steps begin after that, and the tier table is available on request before you commit to anything.
What causes a burnt taste with Air Factory vape range?
Nine times out of ten it is priming. A coil that has not been saturated before first use, or a tank run dry, will scorch the wicking and that taste does not go away. Fitting a new coil and waiting a few minutes before the first draw prevents it entirely.
Is Air Factory vape range suitable for someone switching from cigarettes?
It can be, and it is one of the more common routes. The deciding factors are the draw style and the strength: a tighter draw with a mid strength is what most switchers settle on, and staff who ask what the customer currently smokes tend to get the match right first time.
What strength should a retailer stock first for Air Factory vape range?
Start with the middle strength in the range and add one step either side once you see what sells. Shops that open with a single strength almost always have to reorder within a fortnight, and the second order is usually the one that reveals the real demand curve.
For wholesale pricing, mixed-case options and current stock on Air Factory vape range, contact VapeWholesaleHub directly. We answer on phone, WeChat and WhatsApp at +86 13711127975, and we can quote case quantities, shipping schedules and documentation in the same conversation.
Related reading
- Air Factory Hub Shelf Life and Storage: Common Mistakes
- Air Factory Hub Bulk Order Discounts: Field Notes
- Air Factory Hub Recycling and Disposal: Refill Tutorial
- Air Factory Hub Advanced Customisation: Warranty Explained
- Air Factory Hub Authenticity Check: Troubleshooting Guide
- Air Factory Hub Safety and Overheating: Case Study
- Air Factory Hub Coil Compatibility: Comparison Table
- Air Factory Hub Scratch Code Verification: Cost Analysis