Air Factory Hub VG PG Ratio: Honest Review

Updated November 14, 2026 · 10 min read · VapeWholesaleHub

This page looks at Air Factory vape range through one specific lens: VG/PG ratio. There are 1800 pages in this library, each covering a different angle, so if you need the wider picture start with the buyer guide and come back here for the detail on VG/PG ratio.

The VG/PG ratio drives vapour density, throat feel and how quickly a coil wears out, which is why Air Factory vape range is produced in more than one blend.

On this page

First impressions
After two weeks
What we would change

First impressions

Stock planning for Air Factory vape range works best when you treat it as a rotation problem rather than a one-off purchase, because the second order is the one that tells you what the first should have been.

On Air Factory vape range specifically, a higher VG blend gives thicker clouds but wicks more slowly, so Air Factory vape range in a high-VG format suits direct-lung tanks rather than small pods.

After two weeks

Most buyers of Air Factory vape range fall into two groups: those replacing something that broke and those upgrading something that still works, and the two need different conversations.

On Air Factory vape range specifically, a higher VG blend gives thicker clouds but wicks more slowly, so Air Factory vape range in a high-VG format suits direct-lung tanks rather than small pods.

Air Factory Hub - After two weeks — Honest Review shown in the context of VG/PG ratio.

What we would change

A specification sheet only tells you what Air Factory vape range can do in a lab; the useful question is what it does after three weeks in a pocket.

On Air Factory vape range specifically, checking the ratio before you order Air Factory vape range in bulk avoids the classic mistake of stocking a thick liquid for a device that cannot feed it.

Specification	Typical value	Why it matters
Capacity	30 ml / 1500 puffs	Sets how often a customer rebuys
Battery	400 mAh	Decides the daily-use experience
Output	12 W @ 0.3 ohm	Must match the coil fitted
Strength	3 mg	Drives who the product suits
Coil life	6 days average	Feeds the accessory sale

Questions we are asked about VG/PG ratio

What causes a burnt taste with Air Factory vape range?

Nine times out of ten it is priming. A coil that has not been saturated before first use, or a tank run dry, will scorch the wicking and that taste does not go away. Fitting a new coil and waiting a few minutes before the first draw prevents it entirely.

What strength should a retailer stock first for Air Factory vape range?

Start with the middle strength in the range and add one step either side once you see what sells. Shops that open with a single strength almost always have to reorder within a fortnight, and the second order is usually the one that reveals the real demand curve.

How should Air Factory vape range be stored to protect shelf life?

Cool, dark and sealed. Heat and direct sunlight degrade both nicotine and flavour well before the printed date, and a shop window is the worst place in the building to keep stock for any length of time.

How quickly can a repeat order of Air Factory vape range be dispatched?

In-stock repeat orders normally leave within 11 working days, and consolidated freight shortens the door-to-door time considerably on larger consignments. Planning the reorder point against the slowest leg rather than the fastest avoids the gaps that cost sales.

For wholesale pricing, mixed-case options and current stock on Air Factory vape range, contact VapeWholesaleHub directly. We answer on phone, WeChat and WhatsApp at +86 13711127975, and we can quote case quantities, shipping schedules and documentation in the same conversation.