Air Factory Hub TPD Compliance: Complete Guide
Updated September 2, 2026 · 10 min read · VapeWholesaleHub
This page looks at Air Factory vape range through one specific lens: TPD compliance. There are 1800 pages in this library, each covering a different angle, so if you need the wider picture start with the buyer guide and come back here for the detail on TPD compliance.
TPD compliance governs bottle size, strength ceiling and notification, and Air Factory vape range is supplied within those limits for the UK and EU market.
What this guide covers
Stock planning for Air Factory vape range works best when you treat it as a rotation problem rather than a one-off purchase, because the second order is the one that tells you what the first should have been.
On Air Factory vape range specifically, retailers who cannot produce compliance paperwork on request lose listings, so keep the documentation for Air Factory vape range with the invoice.
How to choose
Most buyers of Air Factory vape range fall into two groups: those replacing something that broke and those upgrading something that still works, and the two need different conversations.
On Air Factory vape range specifically, rules shift periodically, and a supplier who tracks changes proactively is worth more than a marginal price advantage on Air Factory vape range.
Practical next steps
A specification sheet only tells you what Air Factory vape range can do in a lab; the useful question is what it does after three weeks in a pocket.
On Air Factory vape range specifically, retailers who cannot produce compliance paperwork on request lose listings, so keep the documentation for Air Factory vape range with the invoice.
| Specification | Typical value | Why it matters |
|---|---|---|
| Capacity | 100 ml / 600 puffs | Sets how often a customer rebuys |
| Battery | 650 mAh | Decides the daily-use experience |
| Output | 12 W @ 0.6 ohm | Must match the coil fitted |
| Strength | 20 mg | Drives who the product suits |
| Coil life | 5 days average | Feeds the accessory sale |
Questions we are asked about TPD compliance
What is the realistic wholesale margin on Air Factory vape range?
Most retailers work to a target of 67 to 83 percent at the counter, with the figure moving up when accessories are bundled. Margin per shelf metre is the better measure, because a fast-moving line earns more than a high-margin one that sits still.
What causes a burnt taste with Air Factory vape range?
Nine times out of ten it is priming. A coil that has not been saturated before first use, or a tank run dry, will scorch the wicking and that taste does not go away. Fitting a new coil and waiting a few minutes before the first draw prevents it entirely.
How should Air Factory vape range be stored to protect shelf life?
Cool, dark and sealed. Heat and direct sunlight degrade both nicotine and flavour well before the printed date, and a shop window is the worst place in the building to keep stock for any length of time.
Are there different versions of Air Factory vape range for different markets?
Yes, and it matters. Strength ceilings, bottle sizes and notification requirements differ between markets, so the version supplied is matched to the destination at the point of order rather than afterwards.
For wholesale pricing, mixed-case options and current stock on Air Factory vape range, contact VapeWholesaleHub directly. We answer on phone, WeChat and WhatsApp at +86 13711127975, and we can quote case quantities, shipping schedules and documentation in the same conversation.
Related reading
- Air Factory Hub VG PG Ratio: Case Study
- Air Factory Hub Resistance and Ohms: Travel Guide
- Air Factory Hub Bulk Order Discounts: Field Notes
- Air Factory Hub TPD Compliance: Cleaning Tutorial
- Air Factory Hub Advanced Customisation: Warranty Explained
- Air Factory Hub Recycling and Disposal: Setup Walkthrough
- Air Factory Hub Safety and Overheating: Honest Review
- Air Factory Hub Seasonal Demand: Flavour Ranking