Air Factory Hub Safety and Overheating: Spec Sheet

Updated November 1, 2026 · 10 min read · VapeWholesaleHub

This page looks at Air Factory vape range through one specific lens: safety and overheating. There are 1800 pages in this library, each covering a different angle, so if you need the wider picture start with the buyer guide and come back here for the detail on safety and overheating.

Safety comes from using the right cell, the right charger and a little common sense, and Air Factory vape range is built with protection circuitry for exactly that.

On this page

Headline specifications
Less obvious details
What the spec hides

Headline specifications

Packaging is not decoration for Air Factory vape range: it is compliance, tamper evidence and the first thing a customer judges quality on.

On Air Factory vape range specifically, a device that becomes uncomfortably warm should be set down and checked rather than used, which applies to Air Factory vape range as to any powered product.

Less obvious details

Freight cost per unit falls sharply with consolidation, so combining Air Factory vape range with other lines often beats a dedicated small shipment.

On Air Factory vape range specifically, damaged wraps and dented cells should never be charged, and that rule protects every user of Air Factory vape range.

Air Factory Hub - Less obvious details — Spec Sheet shown in the context of safety and overheating.

What the spec hides

Customers rarely complain about performance first; they complain about the thing that made their day inconvenient, and Air Factory vape range is judged the same way.

On Air Factory vape range specifically, a device that becomes uncomfortably warm should be set down and checked rather than used, which applies to Air Factory vape range as to any powered product.

Specification	Typical value	Why it matters
Capacity	100 ml / 2500 puffs	Sets how often a customer rebuys
Battery	1500 mAh	Decides the daily-use experience
Output	25 W @ 0.8 ohm	Must match the coil fitted
Strength	18 mg	Drives who the product suits
Coil life	20 days average	Feeds the accessory sale

Questions we are asked about safety and overheating

What causes a burnt taste with Air Factory vape range?

Nine times out of ten it is priming. A coil that has not been saturated before first use, or a tank run dry, will scorch the wicking and that taste does not go away. Fitting a new coil and waiting a few minutes before the first draw prevents it entirely.

How should Air Factory vape range be stored to protect shelf life?

Cool, dark and sealed. Heat and direct sunlight degrade both nicotine and flavour well before the printed date, and a shop window is the worst place in the building to keep stock for any length of time.

How do I check that a batch of Air Factory vape range is genuine?

Every retail unit carries a scratch code that can be checked against the production record. A code that fails twice, packaging with inconsistent print, or a price well below the normal floor are the three signals that should stop a purchase.

What is the realistic wholesale margin on Air Factory vape range?

Most retailers work to a target of 56 to 69 percent at the counter, with the figure moving up when accessories are bundled. Margin per shelf metre is the better measure, because a fast-moving line earns more than a high-margin one that sits still.

Air Factory Hub buying detail — Detail view referenced in the Spec Sheet section.

For wholesale pricing, mixed-case options and current stock on Air Factory vape range, contact VapeWholesaleHub directly. We answer on phone, WeChat and WhatsApp at +86 13711127975, and we can quote case quantities, shipping schedules and documentation in the same conversation.